Звуження

Smooth Transition Between Different Sheet Thicknesses

Smooth transitions for different plate thicknesses

Звуження is used when joining sheets of different thicknesses, where a smooth transition from the thicker sheet to the thinner one is required. A transition is machined on the edge of the thicker sheet at a steep angle, typically 75° or more, with a transition length often defined at a ratio of approximately 1:4.

The main objective is to eliminate the sudden change in thickness and create a smooth geometry suitable for subsequent welding.

Ключові переваги

Why fabricators use Звуження

More uniform welded joints

Improved stress distribution

Reduced stress concentration

Easier machining and surface finishing

Precise geometry without manual grinding

Why Звуження matters

Less Grinding. Faster Production. Consistent Quality.

For large welded structures, mechanized Звуження can significantly reduce manual grinding and edge preparation, shorten production time and provide consistent, repeatable quality.

Controlled Machining. Less Grinding. Greater Efficiency.

With N.KO Machines, this type of transition can be produced by controlled mechanical machining instead of manual grinding, making the technology particularly advantageous for long edges and series production.

Інвестиції, які окупаються

Готові покращити підготовку до зварювання?

Розкажіть нам, з чим ви працюєте — матеріал, товщину та застосування — і ми порекомендуємо правильне рішення для вашої системи.